Get a FREE Jawbone ICON Bluetooth Headset

Sign up to receive special offers by email and we'll give you a priority code good for one FREE Jawbone ICON Bluetooth headset.

3 Easy Steps

1. Click the button below to enter your email address and get your priority code.
2. Use your priority code when you purchase a wireless office headset at Headsets.com.
3. Receive one FREE Jawbone Icon with your wireless headset purchase!

Jawbone ICON

Sign Up for Special Offers

Jawbone Pairing Guides

Pairing the Jawbone ERA to Your Cell Phone

1. Put your phone into pairing mode

   This can usually be accomplished by going under settings in your menu and selecting Bluetooth. Follow the prompts to "find a new device." If you are having problems, refer to your phone's user guide.

2. Put your Jawbone ERA into pairing mode

   The first time you turn your Jawbone ERA on it will immediately go into pairing mode. If you need to manually put the Jawbone into pairing mode, you have two options:

   Option 1: Turn your Jawbone on (slide the power switch to ON, the position where you can see the blue indicator) and shake the headset back and forth two times. The LED light that surrounds the little rubber piece that rests against your cheek will flash red and white once the headset is in pairing mode. Once you see this, you can proceed to step 3.

   OR

   Option 2: Start with headset off (slide the power switch to OFF, the position where you cannot see the blue indicator). Press and hold the button on the back of the headset and slide the power switch to ON. Continue to hold down the button until you see the LED light flash red and white (the LED surrounds the little rubber piece that rests against your cheek, then release the talk button. The headset is now in pairing mode and you can continue to step 3.

3. Select device and enter in universal key

   Your phone may or may not ask you to enter in a key code. If it does, the code is always four zeros: 0000

4. You are paired up!

Pairing the Jawbone ICON to Your Cell Phone

1. Put your phone into pairing mode

   This can usually be accomplished by going under settings in your menu and selecting Bluetooth. Follow the prompts to "find a new device." If you are having problems, refer to your phone's user guide.

2. Put your Jawbone ICON into pairing mode

   The first time you turn your Jawbone ICON on it will immediately go into pairing mode. If you need to manually put the Jawbone into pairing mode, start with headset off (slide the power switch to OFF, the position where you cannot see the blue indicator). Press and hold the button on the back of the headset and slide the power switch to ON. Continue to hold down the button until you see the LED light flash red and white (the LED surrounds the little rubber piece that rests against your cheek, then release the talk button. The headset is now in pairing mode.

3. Select device and enter in universal key

   Your phone may or may not ask you to enter in a key code. If it does, the code is always four zeros: 0000

4. You are paired up!

Pairing the Jawbone Prime or Jawbone 2 Bluetooth Headset to Your
Cell Phone

1. Put your phone into pairing mode

   This can usually be accomplished by going under settings in your menu and selecting Bluetooth. Follow the prompts to "find a new device." If you are having problems, refer to your phone's user guide.

2. Put your Jawbone 2 Bluetooth headset into pairing mode

   The first time you turn your Jawbone on it will immediately go into pairing mode. If you need to manually put the Jawbone into pairing mode, start with headset off. Hold down the NoiseAssasin button and power on. Continue to hold down button for 2 seconds. Headset will flash red and white when it is in paring mode.

   If you are having trouble with this step, try pushing in the NoiseAssassin button just a half a second before you push in the talk button.

3. Select device and enter in universal key

   Your phone may or may not ask you to enter in a key code. If it does, the code is always four zeros: 0000

4. You are paired up!