Jawbone Prime and Jawbone 2 Pairing Guide

Pairing your Jawbone Prime or Jawbone 2 to Your Cell Phone

1. Put your phone into pairing mode

   This can usually be accomplished by going under settings in your menu and selecting Bluetooth. Follow the prompts to "find a new device." If you are having problems, refer to your phone's user guide.

2. Put your Jawbone Bluetooth headset into pairing mode

   The first time you turn your Jawbone on it will immediately go into pairing mode. If you need to manually put the Jawbone into pairing mode, start with headset off. Hold down the NoiseAssasin button and power on. Continue to hold down button for 2 seconds. Headset will flash red and white when it is in paring mode.

   If you are having trouble with this step, try pushing in the NoiseAssassin button just a half a second before you push in the talk button.

3. Select device and enter in universal key

   Your phone may or may not ask you to enter in a key code. If it does, the code is always four zeros: 0000

4. You’re paired up!

   If your Jawbone is nearing the end of its life, it may be time to upgrade to a wireless headset with Bluetooth. For maximum productivity, you'll want the Leitner Tri-Compatibile Wireless Headset – it syncs perfectly with your desk phone, computer and cell phone to give you perfect calls on all your devices.