Skip to content

Plantronics Pulsar 590a Pairing Guide

Disclaimer: We do not sell this headset, thus do not have much information on it aside from what is already in this article.

 

Pairing your Plantronics Pulsar 590a to Your Cell Phone

  1. Put your phone into pairing mode

    This can usually be accomplished by going under settings in your menu and selecting Bluetooth. Follow the prompts to "find a new device." If you are having problems, refer to your phone's user guide.

  2. Put your Pulsar headset into pairing mode

    Begin with the headset turned off. Press and hold the call control button then power the headset on and when the indicator light flashes red and blue, release the call control button. Once the headset is paired successfully the headset will flash blue.

  3. Select the headset in your phone's Bluetooth device menu and enter in universal key

    Your phone may or may not ask you to enter in a key code. If it does, the code is always four zeros: 0000

  4. You are paired up!

Compare headsets

Select 2 or 3 items to compare

Select first item to compare

Select second item to compare

Select third item to compare

Compare