Leitner Corded Headsets and Amplifiers

Leitner wired headsets don’t have their own amp, but they can be used with ALL of our headset amps!

Leitner with the Executive Pro Amp

This Executive Pro amp comes with a quick disconnect cord that does not fit Leitner headsets.

To use this amp, the headset will need to be accompanied with a Leitner Quick Disconnect Cord. Once you have this, though, you can use it in place of the quick disconnect cord that comes with the amp.

• Compat for the Leitner Cord = 2 & 3 (test compat for best sound)
• Compat for the Executive Pro Amp =1 & A (Remove side panel to reveal these switches)

Compat may vary from phone to phone, test it out and see what works best.

Leitner with the Sennheiser Amp

This Sennheiser amp comes with a quick disconnect cord that does not fit Leitner headsets.

To use this amp, the headset will need to be accompanied with a Leitner Quick Disconnect Cord. Once you have this, though, you can use it in place of the quick disconnect cord that comes with the amp.

• Compat for the Leitner Cord = 2 & 4 (test compat for best sound)
• Compat for the Sennheiser Amp= A (Located on the underside of the amp)

Compat may vary from phone to phone, test it out and see what works best.

Leitner with the Plantronics M22 (discontinued!)

Note: this amplifier has been discontinued

The Plantronics M22 amp works right out of the box! The quick disconnect cord plugs right into the Leitner headset.

You do NOT need the Leitner Quick Disconnect Cord, and can use the cord that comes with the M22!

• Compat for the Leitner Cord = 1 & 4 (test compat for best sound)
• When connected to the Cortelco, use compat 1 & 3

Compat for the M22 Amp = 5 (Remove side panel to reveal the compat switch)

Compat may vary from phone to phone, test it out and see what works best.

For older Plantronics amps, please try compats and cords to ensure they do not need a Leitner QD Cord.

Note: If you just need to replace an M22 QD-to-headset cord, you can get the Leitner QD cord, just like the ones above.

Pam Guillen

May 25, 2023

I am looking for a phone amplifier for our Mitel 6930 IP as well as a headset to go along with it. All of the amplier/head sets I have located that are compatible for this phone are all wired – do you all sale a wireless option with the amplifier? Please advise.
———
Headset Answers replied:
All our wireless headsets will work great with your Mitel 6930 IP phone! They all have built-in amplifiers, and with the Mitel EHS Cable, all of them will offer remote answering as well!

https://www.headsets.com/collections/wireless-headsets-office-headset-systems https://www.headsets.com/products/leitner-electronic-hookswitch-for-mitel-phones