How do I use the LA-11, the Headsets.com Automated Handset Lifter? Skip to content
Call 1-800-HEADSETS (1-800-432-3738) Mon-Fri 9:00-7:30 Eastern Time • Free 2-Day Shipping & Free Returns Always!
Call 1-800-HEADSETS Mon-Fri 9:00-7:30 EST
Free 2-Day Shipping & Free Returns Always!

How do I use the LA-11, the Headsets.com Automated Handset Lifter?

When using the LA-11, they must use a DC adapter. The LA-11/DCA comes with the DCA ($59.95).

· To activate the lifter, simply push the “On” button on the EP and the lever raises the receiver (the red light

will appear on the front of the LA-11).

· To hang up from a call, push the “Off” button and the call is ended.

· Once the LA-11 is stuck down to the phone, there is a cord that comes with it that has 3.5mm pins on either

side. One end of this plug will go into the back of the LA-11 where it says “Lift Input”. The other end goes into

the EP. It goes into an unmarked hole right next to where the headset plugs in.

In the box there is included: The LA-11, the 3.5mm connector cord, and sticky tape.

There is no reset for the for the LA-11, although you can always try unplugging it and plugging it back in. If it still does not work, replace it.

Right - Quick Start Guide