Skip to content
Call 1-800-HEADSETS (1-800-432-3738) Mon-Fri 9:00-7:30 EST • Free 2-Day Shipping & Free Returns Always!

How do I use the TL7601 aka Marathon Dialpad?

[DISCONTINUED]

These instructions only apply to Partner Phone systems. Some of these functions may work when connecting directly to the wall but we cannot say for certain.

To make a call:

Press ON/OFF on the headset to turn on the headset, then enter the telephone number on the dial pad, and press CALL/FLASH on the remote dial pad.

-OR-

Press ON/OFF on the headset to turn on the headset, then press CALL/FLASH on the remote dial pad, and enter the telephone number on the dial pad.

-OR-

(When using a Partner phone system) Press ON/OFF on the headset to turn on the headset, then enter the telephone number on the telephones keypad.

To end a call:

Press OFF/CLEAR on the remote dial pad.

-OR-

Press ON/OFF on the headset.

How to Answer a Call:

When the phone rings, press the CALL/FLASH button on the remote or the ON/OFF button on the headset. Please note, if you answer from the headset and want to use the remote for advanced features the CALL/FLASH button will have to be pressed before attempting advanced features.

How to Place a Call on Hold:

Press the CALL/FLASH button on your remote. You should hear an intercom dial tone. Now press OFF. Your call is now on hold.

Retrieving a Call from Hold:

In order to retrieve a call from hold you generally must go back to your Partner Phone and press the line that is on hold.

How to Transfer a Call with an Announcement:

Press the CALL/FLASH button once. You will hear an intercom dial tone, which means the call is parked. Now, dial the extension to which you want to transfer the call. The phone will ring. When someone answers, announce the call: if he/she accepts the call, press OFF and the call will be transferred. If no one is available at that extension, press CALL/FLASH and you will be returned to the call.

How to make an Intercom Call:

Press the CALL/FLASH button to get an open line (you cannot place an intercom call while on the line with a caller). You should hear a dial tone. Now press the (*) key and 71. This activates the intercom feature. Now, simply dial the extension of the person you wish to intercom and your voice will be heard through the intercom. Press OFF when done.

PLEASE NOTE: Intercom feature may not work with the Partner ACS system. Check your phone’s feature guide for other possible ways to use the intercom feature.

How to make a Conference Call:

After you are connected with the first party, press the CALL/FLASH button. This will give you an intercom dial tone, which means the first party is now parked. Press 9 to get an outside line, then dial the new phone number (Note: If you are conferencing someone from an inside line press CALL/FLASH and dial their extension). When the second party answers, press the CALL/FLASH button once. You should now be connected with both parties. In the event that the number is busy, or if there is no answer, press OFFand you will return to the first party.

When you are ready to end the conference call, press CALL/FLASH to hand up on both callers; if you want to continue speaking with the first caller, press OFF and the last caller will be dropped.

Hi, I'm Kyle!

I manage this blog. Feedback, comments, complements, criticisms, or any other questions? I'll take them all!

Kyle Newgent
Headset Blogger