How do we turn on the "Auto On" feature on Leitner LH200/300 wireless headsets?

Currently, when you pick your headset up from the base, it will be OFF. After following the instructions below, when you pick up your headset, it will automatically turn on. Pretty neat!

ACTIVATING “AUTO ON”

1. Remove the Leitner headset from the base and make sure the headset is OFF.
2. On your headset you will press and hold the + & - on the headset at the same time for 3 seconds
3. The LED on the headset will flash slowly to show Auto Answer ON

Note: To turn this feature off do the same instruction above, only this time the LED light will flash quickly.