Skip to content

Leitner Corded Headsets + Amplifiers

Leitner wired headsets don’t have their own brand of amp, but they can be used with ALL of our headset amps!


Leitner with the Executive Pro Amp:

Executive pro corded headset amplifier for Leitner headsets

This Executive Pro amp comes with a quick disconnect cord that does not fit Leitner headsets.

To use this amp, the headset will need to be accompanied with a Leitner Quick Disconnect Cord. Once you have this, though, you can use it in place of the quick disconnect cord that comes with the amp.

  • Compat for the Leitner Cord = 2 & 3 (test compat for best sound)
  • Compat for the Executive Pro Amp =1 & A (Remove side panel to reveal these switches)

Compat may vary from phone to phone, test it out and see what works best.


Leitner with the Sennheiser Amp:

Sennheiser wired headset amplifier

This Sennheiser amp comes with a quick disconnect cord that does not fit Leitner headsets.

To use this amp, headset will need to be accompanied with a Leitner Quick Disconnect Cord. Once you have this, though, you can use it in place of the quick disconnect cord that comes with the amp.

  • Compat for the Leitner Cord = 2 & 4 (test compat for best sound)
  • Compat for the Sennheiser Amp= A (Located on the underside of amp)

Compat may vary from phone to phone, test it out and see what works best.


Leitner with the Plantronics M22:

Plantronics M22 wired headset amplifier

This Plantronics amp works right out of the box! The quick disconnect cord plugs right into the Leitner headset.

You do NOT need the Leitner Quick Disconnect Cord, and can use the cord that comes with the M22!

  • Compat for the Leitner Cord = 1 & 4 (test compat for best sound)
  • When connected to the Cortelco, use compat 1 & 3

Compat for the M22 Amp = 5 (Remove side panel to reveal the compat switch)

Compat may vary from phone to phone, test it out and see what works best.


For older Plantronics amps, please try compats and cords to ensure they do not need a Leitner QD Cord.

*Note* If you just need to replace an M22 QD to headset cord, you can send the Leitner QD cord, just like the ones above.

Hi, I'm Kyle!

I manage this blog. Feedback, comments, compliments, criticisms, or any other questions? I'll take them all!

Kyle Newgent wearing a Leitner office headset

Kyle Newgent
Headset Blogger