Leitner LH500/600 Series Wireless Headset Pairing

Our Leitner LH500/600 series headsets have a new way of pairing to the base. Check out how right here!

Automatic Pairing

• Set the headset into the charging base
• The FocusLight on headset and base will both flash purple during registration
• Once the headset light goes out and the base turns blue, the headset should be paired to the base and ready to go

Manual Pairing (resync)

• Make sure the headset is turned off, out of the charging base, and the charging base is in phone mode (Both FocusLights will be off after you do this.)
• Press and hold round ON/OFF button on the headset for about 5 seconds until the FocusLight flashes blue once, then let go
• Headset FocusLight will then start flashing purple
• Press and hold phone button on the headset base for 5 seconds until it flashes, then let go. Base FocusLight will continue flashing purple
• They will flash purple together for a few seconds. Once they're paired, the TEL light will go solid and the FocusLight on the headset and base will turn off