Skip to content

Leitner TS Steps Before Replacing for No Flash During Resync (LH200/300 series)

  1. Unplugged reset
    1. Puffy battery can be removed - Replace the battery
    2. Puffy battery that can't be removed - Replace the mic
    3. Non-puffy battery, move on to step 2
  2. Reseat the battery, holding it in to ensure it establishes a connection
  3. Put battery door back on, making sure it flashes
  4. If no flashing then, and you can't get it to flash during a resync, replace the microphone

Hi, I'm Kyle!

I manage this blog. Feedback, comments, compliments, criticisms, or any other questions? I'll take them all!

Kyle Newgent wearing a Leitner office headset

Kyle Newgent
Headset Blogger