Sennheiser Yealink EHS 40 Setup (Cat #2448)*

 

Sennheiser Yealink EHS 40 Setup (Cat #2448)

What is in the box:

- Yealink adapter box that has a USB cord coming out of it

- 1 Sennheiser Y-cord ( has 1 RJ45 on one end and 2 cords (RJ45/RJ9) on the other

-1 Plantronics Y-cord (has RJ45/3.5mm on one end and 2 cords (RJ45/RJ9) on the other

- 1 Jabra Y-cord (has RJ45/RJ9 on each end)

 

1) Connect the bottom of the y-cord into the green phone port in the back of the cube

2) Connect RJ45 and RJ9 end of the y-cord into the 2 available slots in the Yealink adapter box

3) Plug the USB cord coming out of the adapter box into the USB port in the phone

4) Set compat to A and move dipswitch #1 down (bottom right in back of cube)

 

 

Yealink EHS40 Adapter