Skip to content
Call 1-800-HEADSETS (1-800-432-3738) Mon-Fri 9:00-7:30 EST • Free 2-Day Shipping & Free Returns Always!

Headset Answers

Our internal database of over 1,000 headset articles, made available to you for free.

How to permanently register a 2nd Leitner headset to the same base
If you’re looking to PERMANENTLY add a 2nd headset to a Leitner base! Well, here’s how you do it. Registering a 2nd permanent headset:This will allow you to...
Replacing the Battery on Leitner Wireless
Replacing the Battery on Leitner WirelessLH270/370/275:Click here to view the: LH270 Battery Replacement Video The easiest way to remove the battery door is ...
Wireless Y-Adapter - General Setup and Functionality
Wireless Y Training Adapter - General Setup & Functionality CAT #1070NOTE: With direct-connect compatible phones (e.g. Nortel, NEC, Mitel, Comdial models...
Leitner Wireless Headset Unplugged Reset
Your Leitner wireles headset isn't showing battery lights? Unplugged Reset: Remove headset from base Remove the power cord from Base (USB as well if co...
Does the Leitner Wireless in Ear Headset Work with Shoretel Phones?
Why, yes it does!The new over-ear headset Leitner Wireless is 100% compatible with Shoretel.We tested it on the ShoreTel 560 phone.Compat should be on 1.Remo...
How do I put Leitner Wireless headsets into training/conference mode?
Pairing Process: Set up the call using the primary headset. Once on the call, place the secondary headset on the primary headset’s base. The light on...
Leitner lifter setup
Instructions for installing your Leitner LifterBefore setting up the lifter, let's make sure your headset is plugged in correctly to the phone!Connections:1)...
BusyBuddy & Busy Beacon setup*
BusyBuddy & Busy Beacon setupBUSY BEACON DISCONTINUED1) Plug the power cord into the top of the Busy Buddy (or Beacon) box (this is the side that was 3 p...
Leitner Wireless Setup with Cisco EHS
Catalog #2338 on websiteHere is how you set it up:1) Set the RHL/DHSG switch to RHL & 42) Connect the larger end of the EHS (RJ45) to the AUX JACK of the...
Leitner Wireless setup with Yealink EHS 36
Yealink EHS Catalog #2184EHS items needed: The two cords that you need are the the RJ45 cord and the RJ12 cord. It may be useful to describe it as the short ...
Leitner OfficeAlly LH300 series Bluetooth setup instructions
Leitner OfficeAlly LH300 series: Works with Phone, Computer, and BluetoothThe phone and computer set-up is exactly like setting up an LH270. Just in case you...
Leitner wireless setup with EHS40
Yealink Model #s EHS 40 is compatible with: SIP VP59, T58A, T57W, T53W, T54W, T53, T48S, T46S, T42S, T41SPLEASE NOTE: If an expansion module has been connect...
Leitner wireless swivel earpads vs Non-swivel earpads
Do we have a separate catalog code for the new, Leitner swivel headset earpads? OH YEAH! Classic Leatherette Ear Cushion LTR/LEATHERETTE Catalog Code: 2344 ...
Leitner setup with Avaya 1400, 1600, 9000 EHS (Cat#2409)
Catalog # 2409 in website, the Leitner Electronic Hookswitch for Avaya 1400, 1600, and 9000 PhonesHere’s how you set it up:1)Unplug the power cable from the ...
Leitner Wireless Headsets: UniBase Mode
What exactly is UniBase? UniBase is when you put your Leitner wireless headset into 2 modes at once so that you can merge two calls from 2 different devices ...
Leitner Polycom EHS Setup
Leitner Polycom EHS Setup:Note: Make sure no other headsets are connected to the phone when installing EHS cable1) Start in the phone settings of the Polycom...
Leitner Wireless Resync
Leitner ResyncResync:1) Begin with headset turned off and off of the charging base2) Unplug the handset lifter (if you have one of course)3) Hold down the Te...