Most headsets have a bevy of buttons, lights, and beeps that are all necessary to use the headset, as well as figure out what is going on inside it. Here you will learn about the Blueparrott!
Charging N/A N/A Green then Red
(MFB = Multifunction Button)
Power on MFB / 2-3 sec. Two rising tones Blue light flashes
Power off MFB / 2-3 sec. Two falling tones All lights go off
Enter pairing mode MFB / 5-15 sec. Two+Four rising tones Red & Blue lights flash alternately
Volume up Vol Up/Quick press Single tone None
Volume down Vol Dwn/Quick press Single tone None
Mute on Vol Up/2 sec. Single tone None
Mute off Vol Up/2 sec. Single tone None
(Short reminder beep every 10 seconds while mute is on)
Voice dial (start) MFB/1 quick press Single tone None
Voice dial (end) MFB/1 quick press Single tone None
Last number redial Vol Dwn/1 sec. Single tone None
Answer a call MFB/quick press Two rising tones Blue light flashing every 1 sec.
End a call MFB/quick press Two falling tones Blue light flashing every 4 sec.
Reject a call* MFB/2 sec. Two falling tones None
*Sends call to Voicemail (if available)
(415) 351-5857
kyle@headsets.com