Leitner Wireless Headset Yealink Electronic Hookswitch 36 Setup

  1. In your EHS box, find the small EHS36 box, the short, rounded cord (RJ12) and flat cord with thicker ends (RJ45). You can pack the rest of the box back up
  2. Unplug the power cord from your Leitner base
  3. Connect the longer, flat connector cord into the left side of the EHS box. Plug the other end into the AUX port on your charging base
  4. Connect the short, round connector cord into the right side of the EHS box. Plug the other end into the "EHS" jack on your telephone
  5. Plug your green telephone cable into the green telephone port on your charging base and plug the other end into the headset jack on your telephone
  6. On the underside of your charging base, set the two switches to "1" and "DHSG"
  7. Plug your Leitner base back in – You're done!