Skip to Main Content is committed to making its digital experience accessible to all people by meeting or exceeding the requirements of the Web Content Accessibility Guidelines (WCAG) set by the Worldwide Web Consortium (W3C). If you still have questions, please call us at 1-800-432-3738 or email us at
Support › Mitel Setup

Leitner Wireless Headset Mitel Electronic Hookswitch Setup

  1. Unplug the power cord from your Leitner base
  2. Set the switches on the bottom of the base to DHSG and 1
  3. Grab the Y-cable of the EHS. Connect the single end to the AUX port on your telephone
  4. Connect larger cable of the Y-end to the AUX port on Leitner base. Smaller end goes into green TEL port on the base
  5. Plug your power cord back in
  6. *For Mitel phones, you may need to enable DHSG headset mode in your phone settings. This typically is found under "Headset" in your phone's audio settings