Skip to Main Content
Headsets.com is committed to making its digital experience accessible to all people by meeting or exceeding the requirements of the Web Content Accessibility Guidelines (WCAG) set by the Worldwide Web Consortium (W3C). If you still have questions, please call us at 1-800-432-3738 or email us at info@headsets.com

Live Chat

Support › Polycom Setup

Leitner Wireless Headset Polycom Electronic Hookswitch Setup

  1. Press the home button on your phone and navigate to Settings >> Basic >> Preferences >> Headset and make sure Headset Memory Mode is disabled
  2. Press the Back button on your phone and select Hookswitch Mode. Select "Jabra EHS" from the list. Select "Yes" when your phone asks you to reboot
  3. Unplug the power from your Leitner charging base. Set the switches on the bottom to RHL and 1
  4. Plug your green telephone cable into the green telephone port on your charging base and plug the other end into the headset jack of your telephone
  5. Plug the thicker end of the Electronic Hookswitch into the AUX port on your charging base
  6. Remove the protector cap on the other end of the hookswitch and plug it into your phone (there's only one place where it'll fit)
  7. Plug the power back into your base!