Skip to content

Setting Up Your Leitner Wireless Headset

Follow these steps for any Leitner Wireless 200/300/500/600 Series Headsets
  1. Plug the green telephone cord into the green telephone port on the back of your charging base
  2. Plug the other end of the green telephone cord into the headset jack of your telephone
  3. No headset jack? Unplug the handset receiver (curly cord) from your telephone base and connect it to the blue handset port of your charging base. Take the other end of the green telephone cord (from step 2) and plug it into your phone where the handset receiver was previously connected
  4. Connect the power cord to your charging base and let your headset charge for at least four hours
  5. Click here for a guide on computer setup