Skip to content
Leitner Premium Plus Cisco EHS Setup
- Unplug the power from your Leitner charging base. Set the switches on the bottom to RHL and 1.
- Plug your green telephone cable into the green telephone port on your charging base and plug the other end into the headset jack of your telephone.
- Plug the thicker end of the Electronic Hookswitch into the AUX port on your charging base.
- Remove the protector cap on the other end of the hookswitch and plug it into your phone (there's only one place where it'll fit).
- Press the home button on your phone and navigate to Settings >> Basic >> Preferences >> Headset and make sure Headset Memory Mode is disabled.
- Press the Back button on your phone and select Hookswitch Mode. Select "Jabra EHS" from the list. Select "Yes" when your phone asks you to reboot.
- Plug the power back into your base!