Skip to content

Leitner Wireless Headset Grandstream Electronic Hookswitch Setup

  1. Remove headset and set it to the side, then turn base around and unplug power
  2. On the hookswitch, we'll find the side with 2 cords
  3. The larger cord will plug into the AUX port on the back of the Leitner. Smaller goes into green TEL cord beside that
  4. On the bottom of the base, set the switches to DHSG and 1. Plug the power back into the base
  5. Find the Menu button on the phone, then Settings, then Basic Settings, and then Headset Type
  6. Change Headset Type to Plantronics EHS
  7. Take the remaining cord of the hookswitch, and plug into the Headset port on the back of the phone
  8. Put your headset back on its base – you're done, congrats!

Compare headsets

Select 2 or 3 items to compare

Select first item to compare

Select second item to compare

Select third item to compare

Compare