Skip to content
  • Support
  • Resync Your Leitner Premium Plus Headset

Leitner Premium Plus Cisco EHS Setup

  1. Remove your headset from the base. Leave it turned OFF.
  2. Press and hold ON/OFF button on the headset. Let go when FocusLight flashes blue.
  3. The headset FocusLight should begin flashing purple. Set it to the side.
  4. Find the TEL mode button on the base. Press and hold until FocusLight on the bases flashes purple.
  5. When both purple flashes stop and TEL light goes solid, the headset is resynced!
  6. Voila! You're done!